How do I set my device to network connection status (Wi-Fi)?
​
There are two types of device network distribution, EZ Mode (quick flash) and AP Mode (slow flash)
​
-
EZ Mode (quick flash) ： Firstly, make sure that the device is powered off for more than 10 seconds, then power on the device. Next, press and hold the ‘Mode’ button on the device for about 5 seconds until the indicator of the device starts flashing quickly. Now the device enters EZ Mode. You can add the device now.
-
AP Mode (slow flash): There is no need to power off the device, but you need to press and hold the ‘Mode’ button on the device for about 5 seconds while the device's indicator is flashing fast, until the device's indicator starts to flash slowly, and the device enters AP Mode. You can add the device now.